Skip to content
Cleaning hot tub jets is essential for maintaining a spa’s performance and ensuring that water flows smoothly. In this guide, we’ll walk you through how to clean your hot tub jets thoroughly, why it’s important, and how regular maintenance can extend the life of your spa.
Step 1: Turn Off the Power and Drain the Tub
Why? Always begin by turning off the power supply to ensure safety. Then drain the hot tub to access the jets easily.
Step 2: Remove and Inspect the Jets
To clean jets thoroughly, remove them from the spa. Most jets twist off easily, but refer to your hot tub manual if needed.
Inspection Tips:
- Look for debris, grime, or calcium buildup.
- Check for any signs of damage or wear.
Step 3: Soak the Jets in a Cleaning Solution
Fill a bucket with warm water and add a gentle cleaner or a 50/50 vinegar-water solution to break down any buildup.
- Soak for 30-45 Minutes: This loosens grime and calcium deposits.
- Scrub the Jets: Use a soft brush or cloth to scrub off any remaining dirt.
Step 4: Clean the Jet Nozzles and Housing
Use a brush to clean the inside of the jet housing where the jets were installed, removing any hidden buildup.
Step 5: Rinse and Reinstall the Jets
Rinse each jet thoroughly with water to remove any remaining cleaner, and then twist them back into place.
Step 6: Refill and Test the Tub
Once the jets are reinstalled, refill the tub and power it back on. Run the jets to ensure they’re functioning properly, and water is flowing smoothly.
Maintenance Tips for Clean Jets
- Regular Cleaning Schedule: Clean the jets every 2-3 months or as needed based on usage.
- Use Jet Cleaner: Add a jet cleaner every few months to maintain the jets between deeper cleanings.
- Keep the Water Balanced: Proper pH and sanitizer levels help prevent buildup.
Keeping your hot tub jets clean ensures optimal performance and a relaxing experience. Follow these steps regularly to maintain your spa and avoid costly repairs. Remember to bookmark this guide and check out our recommended cleaning solutions to make the process even easier.