Skip to content
Jacuzzi
6600-289 - replaced with 6600-722 Sundance Spa and Jacuzzi Circuit Board (rev 5.57)
Couldn't load pickup availability
6600-289/6600-722 Sundance and Jacuzzi Spa Circuit Board (rev 5.57+)
Replaced by 6600-722, which is what will be sent.
The 6600-289 circuit board with is used for revision beginning with 5 in spas without a circulation pump
The 6600-289 revision 5.57+ is used for the following Sundance Spa models:
- 2000-2002 Sweetwater Aruba (Replaces 6600- 082 and 6600-089 circuit board)
- 2000-2002 Sweetwater Bali (Replaces 6600- 082 and 6600-089 circuit board)
- 2000-2002 Sweetwater Cyprus (Replaces 6600- 082 and 6600-089 circuit board )
- 2003 - 2005 Del Sol Redondo
- 2003 - 2005 Del Sol Hermosa
- 2006 to Newer Sundance Denali 680 (1 pump system)
- 2006 to Newer Sundance Tacoma 680 (1 pump system)
We have extensive experience with Sundance Spas and will be happy to answer any questions you have please email or call us today.
Circuit boards are not "plug and play - they will require correct component voltage set-up and dipswitch configuration. Please follow the wiring schematics on the back side of the spa pack cover.
Do not buy a circuit board based on appearance, as many boards look the same and manufacturers can change board appearance. Refer to this tech tip before buying a replacement board What to Look for When Buying a Circuit Board €“ Spa Parts Experts
Manufacturer: Sundance Spas
Manufacturer Number: 6660-289
Manufacturer Warranty: 1 year parts.
Share
Frequently Asked Questions
A spa air blower forces air into the spa's air plumbing system to create bubbles through the air jets. This produces the bubbling massage effect many hot tubs are known for and enhances the overall hydrotherapy experience.
No. Some spas use only water jets that mix air through a venturi system. Spas that include a dedicated air blower produce stronger bubbles and a more intense massage effect.
Common signs of a failing spa air blower include: No bubbles coming from the air jets, Loud humming or grinding noises, The blower not turning on, Weak or inconsistent airflow. If your spa previously had strong bubbles and they suddenly stopped, the air blower may need to be replaced.
Spa air blowers are commonly available in 1.0 HP, 1.5 HP, and 2.0 HP models. The correct size depends on the number of air jets and the plumbing length in your spa. Matching the horsepower of your existing blower is usually the best option.
Yes. If water flows backward into the blower it can damage the motor. This is why most spa systems include a check valve in the air line to prevent water from reaching the blower.
A loud blower can be caused by: Worn motor bearings, Debris inside the blower housing, Airflow restrictions in the plumbing, A failing blower motor. If the noise continues to get worse, replacement may be necessary.
Many spa owners can replace an air blower if they are comfortable with basic electrical connections. However, if you are unsure about wiring or spa electrical components, professional installation is recommended.
No. An air blower simply pushes air into the spa plumbing. Some models have heated air features that warm the air slightly for comfort, but they do not heat the spa water.